Brisbane, Australia--(ACN Newswire via SeaPRwire.com - December 15, 2025) - Graphene Manufacturing Group Ltd. (TSXV: GMG) (OTCQX: GMGMF) ("GMG" or the "Company") is pleased to provide the latest progress update on the Graphene Aluminium-Ion Battery technology ("G+AI") being developed by GMG and the University of Queensland ("UQ") under a Joint Development Agreement with Rio Tinto, one of the world's largest metals and mining groups, and with the support of the Battery Innovation Center of Indiana ("BIC") in the United States of America.Based on its current state of development as reflected below, the GMG G+AI Battery has similar performance characteristics to those provided by High Power Lithium Titanate Oxide ("LTO") batteries, which are sold at a premium price of up to US$1500/kWh. However, the GMG G+AI Battery can be produced at a substantially lower cost and therefore can be priced below that of LTO batteries. In 2025, sales of LTO batteries, which are used in many applications globally, totalled US$ 5.6[1] billion.Battery Performance Update:GMG is pleased to announce that it has progressed its G+AI Battery technology and believes that, once development is completed, it can meet the key target specification requirements for the main targeted battery use case as per Figure 1, including:Charging in under 6 minutes;Energy density > 100 Wh/kg after 1 hour of charging;Long Cycle Life (10,000 cycles);Safe (no Lithium);Lower Thermal Runaway Risk; andLikely no thermal management system will be needed.Bob Galyen, GMG Non-Executive Director, commented: "In my nearly five decades in the battery industry, I have rarely seen a technology with the disruptive potential of GMG's next-generation graphene aluminium-ion battery. With the possibility of charging from empty to full in around six minutes, this chemistry fundamentally changes how designers can think about electric vehicles, consumer electronics, and stationary storage. Instead of planning around long charge stops with large packs, engineers can optimise for rapid energy turnaround, with higher power, and safer, with GMG's battery made from abundant raw materials. Lithium-ion will remain a key part of the energy landscape for years to come, but its limitations in fast charging, temperature tolerance, and critical-mineral supply are increasingly evident. By leveraging aluminium and graphene, the GMG team is demonstrating a pathway to reduce reliance on traditional lithium-based systems while delivering step-change improvements in charge time and power density. This is not an incremental tweak to existing cells - it is a new platform that can open markets and use cases that were previously uneconomic or impractical. As GMG moves from the lab toward scaled manufacturing, its primary focus is on proving reliability, safety, and cost at industrial level. Automotive, grid, and specialty-device partners are already engaging with GMG to explore pilot programs and early integrations. The companies that adapt quickest to this shift will lead the next wave of electrification, and GMG intends to be at the centre of that transition with graphene aluminium-ion technology."Figure 1: G+AI Battery Use Case - heavy mobile equipmentTo view an enhanced version of this graphic, please visit:https://images.newsfilecorp.com/files/8082/278044_gmg_figure1.jpgGMG is pleased to share the energy densities of the current GMG G+AI pouch cell at 60 minutes and 6-minute charging compared to other chemistry batteries on the market (Figure 2), and a voltage vs capacity graph (Figure 3) of its latest G+AI Battery technology based on data provided by the third-party BIC battery testing laboratory.Based on that testing, the current stage of development, batteries produced by GMG and BIC had an energy density of 58 Wh/kg when charged in 1 hour and 26 Wh/kg when charged in 6 minutes. In 6-minute fast charging, the battery cells achieved 62% capacity in 3.2 minutes. The batteries had a nominal voltage of approximately 3.0 Volts and maintained performance over hundreds of cycles at 6-minute fast charging, without the significant degradation typically observed in lithium and sodium-ion batteries at such high charging rates.Figure 2: Different Battery Chemistry Performance at 6 min and 60 min Charge[2]To view an enhanced version of this graphic, please visit:https://images.newsfilecorp.com/files/8082/278044_3e8dbe4f44c75b4b_002full.jpgStandard commercial Lithium Nickel Manganese Cobalt ("LNMC") and Lithium Iron Phosphate ("LFP") battery cells for electric vehicles and stationary storage are not designed for continuous 6-minute charging (10C); typical recommended charge rates are ≤1 hour (1C), often 2 hours (0.5C), with only limited fast charge operation. Only specialized high-power cell designs like LTO battery cells can tolerate charge rates of 6 minutes (10C).[3]Figure 3: Battery performance curves of GMG's G+AI Battery at 60 min and 6min chargeTo view an enhanced version of this graphic, please visit:https://images.newsfilecorp.com/files/8082/278044_3e8dbe4f44c75b4b_003full.jpgGMG has now developed a completely new hybrid electrolyte that is chloride free and noncorrosive, unlike common aluminium battery electrolytes, along with a complex cathode and anode technology that enables very stable fast charging over several cycles. The substrate for both the cathode and anode in the GMG G+AI Battery is aluminium foil - which provides significant cost and weight savings compared with copper, the substrate material used in most lithium and sodium-ion batteries. GMG's technology does not include the use of lithium or copper. The Company has submitted an additional patent application covering these new developments.Craig Nicol, GMG Managing Director and CEO, commented: "I couldn't be happier with the GMG team to get to this point with our battery. We have rebuilt this battery in our weekly sprints from the ground up and developed completely new complex cathode, anode and electrolyte. This will provide a next generation fast charging battery technology currently not available in the world, and we look forward to sending out sample cells to test with partners in early 2026. This technology has many years of development in front of it and will improve as we keep pushing through known issues to improve capacity, voltage and reduce weight."GMG management believes that the Company's battery technology can eventually achieve over 150 Wh/kg when charged in 1 hour, and over 75 Wh/kg when charged in 6 minutes. The Company believes further development of the cathode, anode, electrolyte and component weights will eventually achieve this end goal.Figure 4 shows the latest Graphene Aluminium-Ion Battery multi-layer pouch cell.Figure 4: Current Multi-Layer Battery Pouch CellTo view an enhanced version of this graphic, please visit:https://images.newsfilecorp.com/files/8082/278044_3e8dbe4f44c75b4b_004full.jpgBattery Technology Readiness LevelThe battery technology readiness level ("BTRL") of the G+AI technology remains at Level 4, see Figure 5. GMG is currently optimizing electrochemical behaviour for pouch cells via ongoing laboratory experimentation. Through collaboration with BIC, it is anticipated that the battery technology readiness will progress to BTRL 7 and 8 since the equipment and processes needed to produce the G+AI batteries are the same as those employed to make Lithium-Ion Batteries.Figure 5: Battery Technology Readiness Level (BTRL)To view an enhanced version of this graphic, please visit:https://images.newsfilecorp.com/files/8082/278044_3e8dbe4f44c75b4b_005full.jpgThe Company is confident it can meet the overall timeline, as seen in Figure 6, of its battery cell roadmap that calls for testing of cells with customers in 2026 and small commercial production with support of various partners, including BIC, in 2027.Figure 6: Battery Cell RoadmapTo view an enhanced version of this graphic, please visit:https://images.newsfilecorp.com/files/8082/278044_3e8dbe4f44c75b4b_006full.jpgNext Steps Toward Commercialisation & Market ApplicationsJack Perkowski, GMG Chairman and Non-Executive Director, commented: "I am extremely proud that GMG has progressed its battery to this stage. It is a significant milestone for the Company because the battery technology has so much opportunity in so many applications - especially in commercial vehicles. I look forward to the next updates as GMG makes further progress in the development of its battery technology."The Company continues to see a broad range of applications for a completed GMG G+AI Battery - utilising its ultra-high power-density and economic energy density characteristics. Along with Rio Tinto, a range of global companies have confidentially expressed their interest in working with GMG in the following vertical sectors:Figure 7: Market ApplicationsTo view an enhanced version of this graphic, please visit:https://images.newsfilecorp.com/files/8082/278044_3e8dbe4f44c75b4b_007full.jpgCurrently, GMG believes it will use a plastic battery pack design, similar to Figure 8, to hold the battery pouch cells - reducing the weight, cost and complexity of using a metal case. Using a plastic battery pack is possible for two main reasons - GMG believes that its battery will not require a thermal management system or the fireproofing precautions provided by the metal case in a lithium-ion battery. Using plastic will increase the comparative energy density of GMG's G+AI battery packs when compared to lithium-ion batteries.Figure 8: Expected Battery Pack for G+AIB Pouch CellsTo view an enhanced version of this graphic, please visit:https://images.newsfilecorp.com/files/8082/278044_3e8dbe4f44c75b4b_008full.jpgComparison and Market Review: LTO Batteries As shown in Figure 9 below, the performance of GMG's G+AI battery technology is already very similar to LTO batteries.Figure 9: Comparison of Graphene Aluminium-Ion Battery (G+AI) to Lithium Titanate Oxide (LTO) BatteryParameterHigh Power LTO[4]GMG G+AI BatteryRapid Charging80% in 6 minutes100% in 6 minutesEnergy Density - 6-minute charge37 Wh/kg (80% of Capacity)46 Wh/kg (6 min +)26 Wh/kg(Current)Large upside to be confirmedDepth of DischargeFull RangeFull RangeSafetySafeSafer (no lithium fire potential)Longevity70% performance over 20,000 cyclesTo be confirmedBattery PriceUS$800 - US$1500 / kWh[5]Lower price due to lower material costsNo lithium, no TitaniumMarket SizeUS$5.6 Billion in Sales in 2025Under development LTO batteries are sold at a premium to LFP and LNMC batteries, which are the main chemistries used in electric vehicles and energy storage systems, and are also widely used in other electronic applications due to their high performance and long cycle life. The material and manufacturing costs for GMG's G+AI Battery are expected to be similar to, or less than, the cost to manufacture standard lithium-ion batteries, but substantially lower than the costs to produce LTO batteries.LTO batteries have energy density ranging from 50 - 80 Wh/kg.[6] The LTO product is sold globally for use in many applications - with a total of US$5.6[7] billion sales per annum in 2025. Sales of LTO batteries are expected to grow at 10% per annum to an estimated US$ 9.0 billion by 2030. The major manufacturers of LTO batteries include Toshiba, Gree, Microvast and CATL.Further details on applications for the LTO battery from Mordor Intelligence7 are described below. In many of the use cases for LTO batteries, GMG believes that its G+AI Battery can be substituted at a substantially lower cost.Commercial Vehicles: Automotive, primarily buses, refuse trucks, and drayage tractors rather than passenger cars, is the largest user of LTO batteries. Fleets realize five-year total-cost-of-ownership parity once fuel savings and lower maintenance offset higher upfront prices.Fast-charging Electric Buses and Trucks: Transit authorities need battery systems that accept repeated high-power "opportunity charges" during short layovers. LTO cells replenish 80% capacity in roughly five minutes, allowing operators to shrink fleet size without sacrificing route frequency. U.S. Low-No Emission Bus grants earmark more than US$1.5 billion per year, with bid specifications that explicitly reference rapid-charge capability. Parallel subsidy programs in China reimburse up to CNY 80,000 (US$ 11,396) per new-energy bus, accelerating volume deployment in provincial capitals.Hybrid and BEV: Regenerative braking and high-C-rate acceleration favour the use of LTO batteries. Use in fast-charge EV stations is growing rapidly as ride-hailing fleets adopt swap-ready models.Stationary Storage: Utility-scale batteries now cycle multiple times per day for frequency regulation, peak shaving, and voltage support. Energy-storage-system integrators adopt LTO batteries for grid-frequency response where state-of-charge swings are shallow but frequent.Industrial Robotics: LTO batteries are used in continuous-duty forklifts that require partial charges during operator breaks.Aerospace and Defense: Unmanned aerial vehicles, missile auxiliaries, and soldier-worn power banks operating from -40 °C to +60 °C ambient.5-minute Battery-Swap Stations: Battery-as-a-service platforms require ultra-fast turnaround and high cycle life. CATL confirmed plans to install 1,000 swap stations in 2025 and 30,000-40,000 by 2030, each requiring packs that tolerate thousands of rapid exchanges without degradation.Sub-10 kWh Packs: Cordless construction tools, autonomous ground vehicles, and medical carts select LTO batteries to bypass daily pack swaps.12V starter replacement to Lead acid: GMG's G+AI battery technology would be a viable 12 V starter-battery replacement for lead-acid, offering lower weight, longer cycle life, good low-temperature performance and improved cold-cranking capability, together with excellent tolerance to storage at 0% state of charge. In suitable system designs, the chemistry's stable voltage behaviour can also reduce balancing requirements and simplify battery management, helping to lower overall system cost.Lifecycle Procurement Preference: Many government procurement frameworks now weigh lifecycle reliability higher than purchase price. For example, New Mexico awarded a US$ 400 million bus electrification contract that included stringent thermal-runaway resistance metrics. Europe's Clean Industrial Deal allocates capital for storage technologies that stabilize renewables, aligning well with LTO batteries' fast-response profile.Cylindrical Cells: accounted for 37.7% of LTO battery sales in 2024 as entrenched production lines and robust steel casings satisfied heavy-duty demand. Pouch designs address aerospace weight requirements and constrained dashboards in autonomous robots.Summary of Important Milestones for GMG's G+AI Battery Development: MonthImportant Milestones in the Development of the Graphene Aluminium Ion BatteryMay 2020GMG and UQ win Australian Research Council grant for Graphene battery developmenthttps://graphenemg.com/gmg-and-uq-wins-australian-research-council-grant-for-graphene-aluminium-ion-battery-development/ Apr 2021The University of Queensland and GMG kick off coin cell battery development projecthttps://graphenemg.com/gmg-the-university-of-queensland-research-uni-quest-kick-off-the-graphene-enhanced-aluminium-ion-battery-development-project/May 2021Graphene aluminium-ion battery performance data - Energy Density and Power Densityhttps://graphenemg.com/gmg-graphene-aluminium-ion-battery-performance-data/Jun 2021Graphene aluminium-ion battery performance data - Cycle Lifehttps://graphenemg.com/graphene-aluminium-ion-battery-performance-data/Jun 2021Significant potential battery customer market response to launch of batteryhttps://graphenemg.com/gmg-graphene-aluminium-ion-battery-progress-update/Jul 2021Investment decision for coin cell battery development centrehttps://graphenemg.com/gmg-battery-pilot-plant-investment/Oct 2021Construction starts for coin cell battery development centrehttps://graphenemg.com/construction-battery-pilotplant/Oct 2021Bosch Australia Manufacturing Solutions and GMG sign Letter of Intenthttps://graphenemg.com/gmg-and-bosch-sign-collaboration-arrangement-for-bosch-to-design-and-deliver-gmgs-graphene-aluminium-ion-battery-manufacturing-plant/Dec 2021Commencement coin cell battery development centrehttps://graphenemg.com/battery-pilot-plant/Dec 2021Initial coin cell batteries sent for customer feedbackhttps://graphenemg.com/graphene-aluminium-battery-customers-prototypes/Mar 2022Initial factory acceptance testing of semi-automated prototype battery cell assembly equipmenthttps://graphenemg.com/gmg-announces-initial-factory-acceptance-testing-of-semi-automated-prototype-battery-cell-assembly-equipment/Mar 2022Wood Engineering and GMG Sign a Letter of Intenthttps://graphenemg.com/gmg-and-wood-agree-collaboration-arrangement-for-wood-to-engineer-and-deliver-major-graphene-manufacturing-expansion-projects/May 2022Rio Tinto and GMG sign Letter of Intenthttps://graphenemg.com/gmg-riotinto-energysavings-battery/Jun 2022Commissioning of Pouch Cell Equipmenthttps://graphenemg.com/gmg-manufactures-first-pouch-cell/Jun 2022Bob Galyen, former chief technology officer of CATL, joins GMG technical advisory committee.https://graphenemg.com/gmg-technical-advisory-committee-leadership-team-additions-and-cfo-change/Aug 2022Investment decision for Phase 1 modular Graphene Production Planthttps://graphenemg.com/gmg-announces-phase-1-expansion-project-to-graphene-manufacturing-facility-for-energy-saving-products-and-batteries/Oct 2022Significant battery performance, cell and graphene production improvementshttps://graphenemg.com/gmgs-battery-update-significant-battery-performance-cell-and-graphene-production-improvements/Dec 2022Investment of $600k Battery Development Centrehttps://graphenemg.com/gmg-invests-au-600000-to-accelerate-battery-pouch-cell-customer-testing-development-in-2023/Feb 2023Australian Government Approval (AICIS) for production and sale of batteries.https://graphenemg.com/gmg-receives-regulatory-approval-to-enable-significant-commercial-sales/May 2023Battery Joint Development Agreement with Rio Tinto signedhttps://graphenemg.com/gmg-announces-battery-joint-development-agreement-with-rio-tinto/May 2023Battery Technology Readiness Level (BRTL) 2-3 reachedhttps://graphenemg.com/gmg-announces-battery-team-and-related-updates/May 2023Decision to switch to develop Pouch Cells (instead of Coin Cells)https://graphenemg.com/gmg-announces-battery-team-and-related-updates/Jul 2023Bob Galyen former chief technology officer of CATL joins GMG board of Directorshttps://graphenemg.com/graphene-manufacturing-group-appoints-former-chief-technology-officer-of-catl-limited-to-its-board-of-directors/Sep 2023Battery Pouch Cell Prototypes Multilayered Auto-Stacker Demonstrationhttps://graphenemg.com/gmg-graphene-aluminium-ion-battery-pouch-cell-prototypes-multilayered-auto-stacker-demonstration/Sep 2023Reaching 500 mAh capacity batteryhttps://graphenemg.com/gmg-achieves-500mah-graphene-aluminium-ion-battery-prototype-in-pouch-cell-format/Sep 2023Battery Technology Readiness Level (BRTL) 4 reachedhttps://graphenemg.com/gmg-achieves-500mah-graphene-aluminium-ion-battery-prototype-in-pouch-cell-format/Nov 2023Rio Tinto and GMG Partnership Video Launchedhttps://graphenemg.com/rio-tinto-gmg-battery-partnership-video-launch/Dec 2023Commissioning of modular Graphene Production Planthttps://graphenemg.com/graphene-manufacturing-group-commissions-modular-graphene-production-plant/Feb 20241000 mAh Capacity Reachedhttps://graphenemg.com/gmgs-graphene-aluminium-ion-battery-1000-mah-capacity-reached-and-next-steps-toward-commercialisation/Mar 2024Graphene Manufacturing Group Secures AU$2 million Funding Grant from Queensland Government for Battery Pilot Planthttps://graphenemg.com/graphene-manufacturing-group-secures-au2-million-funding-grant-from-queensland-government-for-battery-pilot-plant/Aug 2024GMG's Graphene Aluminium-Ion Battery: Progress Update and Next Steps Toward Commercialisationhttps://graphenemg.com/gmgs-graphene-aluminium-ion-battery-progress-update-and-next-steps-toward-commercialisation/Mar 2025GMG's Graphene Aluminium-Ion Battery: Collaboration with World Leading USA Battery Innovation Centre and Next Steps Toward Commercialisationhttps://graphenemg.com/gmgs-graphene-aluminium-ion-battery-collaboration-with-world-leading-usa-battery-innovation-centre-and-next-steps-toward-commercialisation/ About BIC:BIC is a collaborative initiative designed to incorporate leadership from renowned universities, government agencies, and commercial enterprises. BIC is a public-private partnership and a not-for-profit organization focusing on the rapid development, testing and commercialization of safe, reliable and lightweight energy storage systems for defense and commercial customers. BIC is a unique organization that has been leading battery cell development for world leading battery companies for over 10 years and has carried out over 500 battery development projects.About GMGGMG is an Australian based clean-technology company which develops, makes and sells energy saving and energy storage solutions, enabled by graphene manufactured via in house production process. GMG uses its own proprietary production process to decompose natural gas (i.e. methane) into its natural elements, carbon (as graphene), hydrogen and some residual hydrocarbon gases. This process produces high quality, low cost, scalable, 'tuneable' and low/no contaminant graphene suitable for use in clean-technology and other applications.The Company's present focus is to de-risk and develop commercial scale-up capabilities, and secure market applications. In the energy savings segment, GMG has initially focused on graphene enhanced heating, ventilation and air conditioning ("HVAC-R") coating (or energy-saving coating) which is now being marketed into other applications including electronic heat sinks, industrial process plants and data centres. Another product GMG has developed is the graphene lubricant additive focused on saving liquid fuels initially for diesel engines.In the energy storage segment, GMG and the University of Queensland are working collaboratively with financial support from the Australian Government to progress R&D and commercialization of graphene aluminium-ion batteries ("G+AI Batteries"). GMG has also developed a graphene additive slurry that is aimed to improve the performance of lithium-ion batteries.GMG's 4 critical business objectives are:Produce Graphene and improve/scale cell production processesBuild Revenue from Energy Savings ProductsDevelop Next-Generation BatteryDevelop Supply Chain, Partners & Project Execution CapabilityFor further information please contact:Craig Nicol, Chief Executive Officer & Managing Director of the Company at craig.nicol@graphenemg.com, +61 415 445 223Leo Karabelas at Focus Communications Investor Relations, leo@fcir.ca, +1 647 689 6041www.graphenemg.comNeither the TSX Venture Exchange nor its Regulation Services Provider (as that term is defined in the policies of the TSX Venture Exchange) accept responsibility for the adequacy or accuracy of this news release.Cautionary Note Regarding Forward-Looking StatementsThis news release includes certain statements and information that may constitute forward-looking information within the meaning of applicable Canadian securities laws. Forward-looking statements relate to future events or future performance and reflect the expectations or beliefs of management of the Company regarding future events. Generally, forward-looking statements and information can be identified by the use of forward-looking terminology such as "intends", "expects" or "anticipates", or variations of such words and phrases or statements that certain actions, events or results "may", "could", "should", "would" or will "potentially" or "likely" occur. This information and these statements, referred to herein as "forward‐looking statements", are not historical facts, are made as of the date of this news release and include without limitation, statements regarding the lower cost to produce GMG G+AI batteries, expectations for GMG G+AI batteries in respect of charging time, energy density, life cycle, safety, thermal runway risk and the need for a thermal management system when development is completed, that the new hybrid electrolyte is chloride free and non-corrosive, that the cathode and anode technology employed enables very fast and stable charging, that GMG G+AI batteries provide significant cost and weight savings relative to copper, that G+AI batteries can achieve over 150 Wh/kg charged over 1 hour and 75 Wh/kg when charged over 6 minutes following further development of cathode, anode, electrolyte and component weights, that G+AI batteries will progress to BTRL 7 and 8, that the timeline for the battery cell roadmap is achievable, that a range of global companies in a variety of industries will be interested in working with GMG, that the battery pack design will be plastic and which offers weight, cost and complexity advantages to a metal case and increased energy density, expectations for the lack of a thermal management system or fireproofing precautions, expectations for material and manufacturing costs, expectations for sales of LTO batteries, expectations for G+AI batteries being substitutable for LTO batteries at lower cost, expectations that G+AI batteries are viable 12V starter battery replacements and the rationale therefor and the advantages of pouch design for aerospace weight requirements and constrained dashboards of autonomous robots.Such forward-looking statements are based on a number of assumptions of management, including, without limitation, assumptions that GMG G+AI batteries can be produced at lower cost, as to charging time, energy density, life cycle, safety, thermal runway risk and the need for a thermal management system for G+AI batteries, the speed and stability of charging, that G+AI batteries will progress to BTRL 7 and 8, that a range of global companies in a variety of industries will be interested in working with GMG, that the battery pack design will be plastic and offer weight, cost and complexity advantages to a metal case and increased energy density, that the service agreement with the BIC will enable the Company to optimize its cell design and battery manufacturing equipment, and that the Company will be able to meet its overall timeline on the battery cell roadmap. Additionally, forward-looking information involves a variety of known and unknown risks, uncertainties and other factors which may cause the actual plans, intentions, activities, results, performance or achievements of GMG to be materially different from any future plans, intentions, activities, results, performance or achievements expressed or implied by such forward-looking statements. Such risks include, without limitation: that GMG G+AI batteries cannot be produced at lower cost, or any of the assumptions as to charging time, energy density, life cycle, safety, thermal runway risk and the need for a thermal management system for G+AI batteries can not be achieved, G+AI batteries do not offer expected speed and stability of charging, that G+AI batteries will not progress to BTRL 7 and 8, that a range of global companies in a variety of industries will not be interested in working with GMG, that the battery pack design will not be plastic and not offer weight, cost and complexity advantages to a metal case and increased energy density, that the Company will not be able to optimize the electrochemical behaviour of the pouch cell through laboratory experimentation or at all, that the Company will not be able to meet its overall timeline on the battery cell roadmap, that the service agreement with the BIC will not enable the Company to optimize its cell design and battery manufacturing equipment and the risk factors set out under the heading "Risk Factors" in the Company's annual information form dated November 04, 2025 available for review on the Company's profile at www.sedarplus.ca.Although management of the Company has attempted to identify important factors that could cause actual results to differ materially from those contained in forward-looking statements or forward-looking information, there may be other factors that cause results not to be as anticipated, estimated or intended. There can be no assurance that such statements will prove to be accurate, as actual results and future events could differ materially from those anticipated in such statements. Accordingly, readers should not place undue reliance on forward-looking statements and forward-looking information. Readers are cautioned that reliance on such information may not be appropriate for other purposes. The Company does not undertake to update any forward-looking statement, forward-looking information or financial out-look that are incorporated by reference herein, except in accordance with applicable securities laws.[1] Lithium Titanate Oxide Battery Market Size, Share & 2030 Growth Trends Report[2] LFP: https://www.evlithium.com/catl-battery-cell/catl-150ah-lifepo4-battery-cell.htmlLNMC: https://keheng-battery.com/product/catl-nmc-3-7v-151ah-high-energy-density-battery-for-ev/LTO: https://www.global.toshiba/ww/products-solutions/battery/scib/product-next/product/cell/high-power.htmlLead Acid: https://www.altronics.com.au/p/s4530-12v-3.5ah-sealed-lead-acid-sla-battery/?srsltid=AfmBOoqZGMEIsX__YYOuRLC3nvYDFtNkf35qZYuYeoh3ACf4wrrOLISD[3] https://findingspress.org/article/21459-impact-of-charging-rates-on-electric-vehicle-batt[4] High-power type cells | SCiB™ Rechargeable battery | Toshiba[5] https://www.ritarpower.com/industry_information/The-Price-of-50-kWh-Lithium-Ion-Batteries-A-Comprehensive-Analysis_297.html#:~:text=Lithium%20Titanate%20(LTO)%20Batteries%3A,cost%20between%20%2440%2C000%20and%20%2460%2C000.[6] https://www.grepow.com/blog/battery-energy-density.html[7] Lithium Titanate Oxide Battery Market Size, Share & 2030 Growth Trends ReportTo view the source version of this press release, please visit https://www.newsfilecorp.com/release/278044 Copyright 2025 ACN Newswire via SeaPRwire.com. All rights reserved. www.acnnewswire.com

SHENZHEN, Dec 15, 2025 - (ACN Newswire via SeaPRwire.com) - China Medical System Holdings Limited (“CMS”, or the “Group”) is pleased to announce that its subsidiary, Dermavon Holdings Limited (“Dermavon”, an innovative pharmaceutical company specialized in skin health which is applying for an independent listing on the Main Board of The Stock Exchange of Hong Kong Limited, please refer to the announcement of the Company dated 22 April 2025 for details), has obtained the relevant licensing rights to the innovative oral JAK1 inhibitor povorcitinib (proposed English generic name: Povorcitinib Phosphate Tablets) (“povorcitinib” or the “Product”), which has been included in the list of Breakthrough Therapeutic Drugs by the Center for Drug Evaluation of the National Medical Products Administration of the People’s Republic of China (“NMPA”), with a proposed indication for adult patients with non-segmental vitiligo. This certification has the potential to accelerate the development and review process of the Product.Povorcitinib is a selective oral small-molecule JAK1 inhibitor, with compound and use patents in certain countries/regions in the Territory. Currently, povorcitinib is in Phase 3 clinical trials for non-segmental vitiligo, moderate to severe hidradenitis suppurativa (HS) and prurigo nodularis in several countries outside China. A Phase 2 clinical trial for the treatment of asthma is also ongoing.In March 2023, Incyte announced that povorcitinib met the primary endpoint in a global multi-center Phase 2b clinical trial for non-segmental vitiligo. Results showed that after 24 weeks of treatment, compared with vehicle, total body repigmentation of patients treated with povorcitinib once daily was significantly improved. Furthermore, according to the extended Phase 2b trial, longer-term use of povorcitinib demonstrated further improvement in total body and facial repigmentation with a favorable tolerability profile[1]. In August 2025, Dermavon received the drug clinical trial approval notice issued by NMPA to conduct clinical trials of povorcitinib for the treatment of non-segmental vitiligo and other indications. Dermavon has initiated the clinical development of the Product in China and may consider further initiating clinical development of povorcitinib in China for the treatment of skin-related diseases such as HS and prurigo nodularis in the future.Vitiligo is a chronic autoimmune disease characterized by depigmentation of the skin, which results from the loss of pigment-producing cells known as melanocytes. It is estimated that there are approximately 10.3 million vitiligo patients in China and non-segmental vitiligo patients account for approximately 8.2 million[2]. Currently, therapeutic options for vitiligo are limited, and the condition is difficult to treat, especially for patients with moderate to severe extensive vitiligo. If approved in China, povorcitinib could provide a differentiated treatment option for patients with non-segmental vitiligo.The Product's inclusion in the list of Breakthrough Therapeutic Drugs is expected to accelerate its development and review process in mainland China. If approved for marketing in China, the Product has the potential to synergize with Dermavon’s commercialized innovative drug ILUMETRI (tildrakizumab injection), commercialized exclusive drug Hirudoid (mucopolysaccharide polysulfate cream) and the innovative drug currently under New Drug Application (NDA) review ruxolitinib phosphate cream, helping the product to quickly realize its clinical and commercial value and benefit more patients with skin diseases. Furthermore, if approved, the Product, together with topical ruxolitinib phosphate cream, will provide vitiligo patients with differentiated and comprehensive treatment options.The Group, through a subsidiary of Dermavon entered into a Collaboration and License Agreement (the “License Agreement”) for povorcitinib on 31 March 2024 with Incyte, obtaining an exclusive license to research, develop, register and commercialize the Product in Mainland China, Hong Kong Special Administrative Region, Macao Special Administrative Region, Taiwan Region and eleven Southeast Asian countries (the “Territory”) and a non-exclusive license to manufacture the Product in the Territory. The subsidiary of Dermavon has sublicensed the relevant rights of povorcitinib in the Territory other than Mainland China to the Group (excluding Dermavon and its subsidiaries).About CMSCMS is a platform company linking pharmaceutical innovation and commercialization with strong product lifecycle management capability, dedicated to providing competitive products and services to meet unmet medical needs.CMS focuses on the global first-in-class (FIC) and best-in-class (BIC) innovative products, and efficiently promotes the clinical research, development and commercialization of innovative products, enabling the continuous transformation of scientific research into clinical practices to benefit patients.CMS deeply engages in several specialty therapeutic fields, and has developed proven commercialization capabilities, extensive networks and expert resources, resulting in leading academic and market positions for its major marketed products. CMS continues to promote the in-depth development in its advantageous specialty fields, strengthening the competitiveness of the cardio-cerebrovascular/ gastroenterology/ ophthalmology/ skin health businesses, bringing economies of scale in specialty fields. Among them, the skin health business (Dermavon) has become a leading enterprise in its field, and is proposed to be listed independently on the SEHK. Meanwhile, CMS continuously promotes the operation and development of its integrated R&D, manufacturing and commercialization chain in Southeast Asia and the Middle East, capturing growth opportunities in emerging markets to support the high-quality and sustainable development of the Group. Reference:1. Results from a global multi-center Phase 2b clinical trial of the product for non-segmental vitiligo indication can be found on the Incyte official website: https://investor.incyte.com/news-releases/news-release-details/incyte-announces-data-phase-2b-study-evaluating-povorcitinib2. Datas are from the China Insights Consultancy (CIC) reportCMS Disclaimer and Forward-Looking StatementsThis press release is not intended to promote any products to you and is not for advertising purposes. This press release does not recommend any drugs, medical devices and/or indications. If you want to know more about the diagnosis and treatment of specific diseases, please follow the opinions or guidance of your doctor or other medical and health professionals. Any treatment-related decisions made by healthcare professionals should be based on the patient’s specific circumstances and in accordance with the drug package insert.This press release which has been prepared by CMS does not constitute any offer or invitation to purchase or subscribe for any securities, and shall not form the basis for or be relied on in connection with any contract or binding commitment whatsoever. This press release has been prepared by CMS based on information and data which it considers reliable, but CMS makes no representation or warranty, express or implied, whatsoever, and no reliance shall be placed on, the truth, accuracy, completeness, fairness and reasonableness of the contents of this press release. Certain matters discussed in this press release may contain statements regarding the Group's market opportunity and business prospects that are individually and collectively forward-looking statements. Such forward-looking statements are not guarantees of future performance and are subject to known and unknown risks, uncertainties and assumptions that are difficult to predict. Any forward-looking statements and projections made by third parties included in this press release are not adopted by the Group and the Company is not responsible for such third-party statements and projections.Media ContactBrand: China Medical System Holdings Ltd.Contact: CMS Investor RelationsEmail: ir@cms.net.cnWebsite: https://web.cms.net.cn/en/home/ Copyright 2025 ACN Newswire via SeaPRwire.com. All rights reserved. www.acnnewswire.com

JAKARTA, Dec 15, 2025 - (ACN Newswire via SeaPRwire.com) - Indonesia's state-owned railway operator PT Kereta Api Indonesia (KAI) has rolled out two major initiatives aimed at strengthening national mobility and accelerating its digital shift: the launch of the Farmer and Trader Train on the Merak Commuter Line, and the expansion of face recognition boarding technology ahead of the 2025/2026 Christmas and New Year travel season.Farmer-Trader train to facilitate the movement of agricultural goods, processed food, and small-scale merchandise by providing dedicated cargo space within a commuter railway environment.KAI said the programs reflect its commitment to inclusive transport services while enhancing operational efficiency and environmental performance — moves that align with international railway modernization trends.A special passenger train featuring oversized windows and often a large glass roof (sunroof) to provide unobstructed, wide-angle views of the passing scenery, turning the journey itself into a scenic experience."KAI is committed to building a rail ecosystem that supports grassroots economies while adopting technologies that meet global service standards," said KAI President Director Bobby Rasyidin. "These initiatives reinforce railways as an inclusive, efficient, and sustainable mode of public transport."New Farmer–Trader Train Strengthens Local Product DistributionEffective 1 December 2025, KAI began operating the Farmer and Trader Train on the Merak–Rangkasbitung corridor in Banten Province. The service is designed to facilitate the movement of agricultural goods, processed food, and small-scale merchandise by providing dedicated cargo space within a commuter railway environment.The rolling stock was fully redesigned by Balai Yasa Surabaya Gubeng, KAI's technical workshop, which modified the interior layout, baggage sections, loading–unloading access points, and safety signage to meet the needs of micro and small enterprises."The train has been engineered by our in-house experts to ensure safe, orderly, and convenient goods movement without disrupting passenger flow," continued Rasyidin.The service operates under a government-funded Public Service Obligation (PSO) scheme with a flat fare of Rp3,000, allowing up to two cargo units per user. It is attached to 14 daily Commuter Line services and stops at 11 stations across coastal and agricultural areas.On launch day, 95 customers used the service, carrying agricultural produce, snacks, and handicrafts for markets in Serang, Cilegon, and Merak. KAI expects the service to reduce traders' reliance on road-based logistics and shift more local supply chains onto rail.Rasyidin said the initiative strengthens regional economic resilience: "Reliable logistics access for small producers is fundamental to local economies. This service opens a more predictable distribution channel for farmers and traders."Facial Recognition Technology Boosts Efficiency, Cuts WasteKAI is also expanding its facial recognition boarding system to improve passenger processing and reduce paper usage in major stations.KAI VP Public Relations Anne Purba, explains, between January and October 2025, the feature recorded 9.29 million uses, cutting ticket paper consumption by 23,245 rolls, equivalent to Rp341 million in savings. Since the system debuted in 2023, it has been used by 19.4 million passengers, contributing significantly to KAI's environmental and cost-reduction goals."Facial recognition shortens boarding time and significantly reduces paper waste, supporting more environmentally responsible operations," Purba said.The technology is now available in 22 stations, with wider deployment planned ahead of peak holiday travel to reduce queues and streamline passenger flow.Purba underscored the strategic value of automation: "Digitalization is not just innovation—it is increasingly essential to managing national mobility at scale. This system helps maintain operational stability when travel demand peaks."Holiday Ticket Sales Climb, Discounts ExpandedDemand for the year-end holiday period—18 December 2025 to 4 January 2026—continues to rise. As of 26 November, KAI had sold 629,060 tickets, or 21.15% of the roughly 3 million seats available.To support affordability and smooth travel, KAI is offering 30% discounts for 156 regular services and 26 additional economy-class trains, totaling 1.5 million discounted seats valid from 22 December to 10 January.Purba said higher mobility is expected across Java and Sumatra: "We are preparing large capacity and fare incentives to ensure safe, orderly, and accessible travel throughout the holiday season."Inclusive and Technology-Driven Mobility for IndonesiaBy combining inclusive rural-focused services with large-scale digital transformation, KAI aims to bring Indonesia's rail sector closer to global standards of accessibility, efficiency, and sustainability."Our strategy aligns with international efforts to build modern public transport systems that deliver broad social and economic impact," Purba concluded.For More Information, please contact:Anne PurbaVP Public RelationsPT Kereta Api Indonesia (Persero)Source: PT Kereta Api Indonesia (Persero), https://www.kai.id Copyright 2025 ACN Newswire via SeaPRwire.com. All rights reserved. www.acnnewswire.com

TransNusa Launched 11 International Routes in 3 YearsIndonesia-based PT TransNusa Mandiri Aviation grows a strong brand with expansion focusing on international routesTransNusa focuses on international tourism island destinations to offer domestic and foreign tourists increased air connectivityTransNusa introduces four new domestic scheduled direct flights to boost connectivity from Bali to Lombok and Bima as well as between renowned diving destinations Manado to Sorong and Sorong to Timika, world’s largest gold mining islandJAKARTA, Dec 15, 2025 - (ACN Newswire via SeaPRwire.com) - TransNusa has successfully launched four new domestic routes today, securing 19 routes in total within three years of operations.TransNusa Group CEO, aviation veteran, Datuk Bernard Francis, known for his acute, unique and out-of-the-box turnaround and change management strategies, led TransNusa towards a secure yet bold growth pattern using a customized business model, which was specifically developed to suit the changing market demand after the onslaught of the pandemic.“What we envisioned for TransNusa was to build an Indonesian-based airline with strong fundamentals. Today, thanks to our hard working and diligent team, the TransNusa brand has grown to resonates confidence and trust,” said Datuk Bernard, adding that TransNusa’s shareholder, China Aircraft Leasing Group Holdings Limited (CALC) and business partners also played a large role in helping build TransNusa into the strong brand it is today.Within 6 months of its operations, TransNusa launched its first international route between Jakarta and Kuala Lumpur, followed by three additional international routes in that same year, including Singapore and China.TransNusa also implemented a milestones as well as initiated and developed new domestic routes, such as the Bali-Manado route.In addition, TransNusa the first Indonesian airline to operate regular scheduled international flights into Guanzhou from three destinations in Indonesia.Datuk Bernard said the primary factor in the successful growth of TransNusa, in the last three years, was their goal to implement a lasting and impactful change around not just the organisation and its people but also its business model and operations.“In TransNusa, a 100% change is not possible overnight, whereas a 5% change in a moderate manner is not only more feasible but allows for a lasting change,” said Datuk Bernard, explaining that it was that principal which has been the backbone of TransNusa's operations and growth.On the new domestic route launches, Datuk Bernard said that TransNusa hopes to provide increased connectivity and travelling options to domestic and international tourists.“We would like to play our part in boosting and increasing air connectivity within Indonesia’s internationally renowned tourism island destinations.“Our focus is in increasing direct flight to destinations that are world renowned for its unique and stunning landscape and natural offerings,” said Datuk Bernard.DATUK BERNARD FRANCIS… TransNusa's team and business partners contributed to the growth of the airline and it’s brand.Flight DetailsTransNusa’s flight from Bali to Lombok will operate two times daily beginning Monday, December 15. The TransNusa flight will depart Bali from the Denpasar International Airport at 07.30am and arrive in Lombok International Airport at 07.55am, with the return flight departing Lombok at 08.25am and arriving in Bali at 09.05am. The second TransNusa flight will depart Bali at 15.55pm and arrive in Lombok at 16.50pm, with the return flight departing Lombok at 17.20pm and arriving in Bali at 18.05pm.“We will increase the frequency of the scheduled flights for the Bali-Lombok route to three times daily on December 21.” Said Datuk Bernard.The third scheduled flight will depart Bali at 18.55pm and arrive at Lombok at 19.35pm. The scheduled flight from Lombok will depart at 20.00pm and arrive in Bali at 20.25pm.Meanwhile, TransNusa’s flight from Bali to Bima will also begin on Monday, December 15.“For the first week, we will operate one scheduled flight from Bali to Bima on Monday, Wednesday, Friday and Sunday.“Starting December 22, TransNusa will operate daily scheduled flights from Bali to Bima,” said Datuk Bernard, adding that the flight will depart Bali from the Denpasar International Airport at 09.35am and arrive at 10.35am at the Sultan Muhammad Salahuddin Airport in Bima.The return flight will depart Bima’s Sultan Muhammad Salahuddin Airport at 11.00am and arrive at Bali’s Denpasar International Airport at 12.10pm.Meanwhile, TransNusa’s schedule flight from Sorong to Timika will operate four times weekly on Monday, Tuesday, Thursday and Saturday.The flight, which will also begin on December 15, will depart Sorong from the Domine Eduard Osok International Airport at 10.50am and arrive in Timika’s Mozes Kilangin Airport at 12.10pm. The return flight will depart Timika at 12.40pm and arrive in Sorong at 14.00pm.On the much sought-after Manado-Sorong route, Datuk Bernard said that TransNusa’s will operate its scheduled flight from Manado to Sorong four times weekly.The scheduled flight from diving haven Manado will operate on Monday, Tuesday, Thursday and Saturday. The flight will depart Manado’s Sam Ratulangi International AIrport at 08.00am and arrive in Sorong’s Domine Eduard Osok International Airport at 10.20am. The return flight will depart Sorong at 14.30pm and arrive in Manado at 14.50pm.TransNusa, A Short HistoryThe 3-year old TransNusa, led by aviation expert and veteran, Datuk Bernard, made waves in the aviation industry with its unique domestic and international business development and growth strategy.Within just 6 months of operations, in 2023, the airline, known then as a new player with new rules, launched its first international route between Jakarta and Kuala Lumpur, followed by the launch of scheduled flights between Jakarta and Singapore.TransNusa, which established itself as a Premium Service Carrier, made headlines in Malaysia, Singapore, China and around the world with news of being the first airline in Indonesia to introduce new exciting routes. In 2023, during its first year of operations, TransNusa became the second Indonesian airline to receive approval to fly to China. In 2024, TransNusa became the first in the world to develop and introduce a new domestic route connecting Bali and Manado. In October 2025, TransNusa added yet another milestones by becoming the first Indonesian airline and second airline in the world to launch scheduled flights from Manado to Guangzhou, China.Media Contact:Trina Thomas RajMobile: +6012 4992672E-mail: trina@myqaseh.org Copyright 2025 ACN Newswire via SeaPRwire.com. All rights reserved. www.acnnewswire.com